Yesterday on QUILTsocial I showed you how I quilted my table runner using the Brother NQ900 machine.
After finishing my table runner, I decided that I wanted to try machine applique using some of the blanket stitches on the Brother NQ900. There are several stitches that would be suitable and they can be widened or lengthened as required. Again I made some stitch samples to find the correct size and look for my project.
I was using flannel fabric and a heavy-weight thread so I changed to a size 14 top-stitch needle. For my first 5 test stitches, I didn’t use a stabilizer on the back. For the rest of them I used my favorite telephone book paper as a stabilizer. It really does make a difference to have the stabilizer as you can see in the picture below. The un-stabilized fabric on the left tended to bunch up a little, but the stabilized fabric lays very flat.
I had two threads that I wanted to use – a heavy-weight cotton and a variegated light-weight polyester.
When doing machine applique it’s important to stitch slowly so I moved the sewing speed controller to a very slow speed. You also have to lift the presser foot often to maneuver the curves. The knee lift attachment on the NQ900 is very helpful for this.
Here’s my first applique using stitch #72 from the utility stitch panel and the open-toe embroidery foot.
Here’s my sample with all of the stitching completed.
For my second applique sample I used the variegated light-weight thread with stitch #38 which I adjusted to make longer and a little wider than the default setting on the sewing machine.
I loved doing machine applique using the Brother NQ900!
Come back tomorrow and I’ll show you even more of the beautiful decorative stitches on the Brother NQ900 machine.
This is part 4 of 5 in this series.
Go back to part 3: Machine quilting with the Brother NQ900
Go to part 5: Even more decorative stitching on the Brother NQ900 machine
[shareaholic app=”follow_buttons” id=”23735596″]
7 comments