FREE Quilting Patterns, Tutorials, Magazine

Home » HA Kidd » H.A. Kidd sewing notions » Make 9 Fabric Donut Shapes with the TrueCut 360 Circle Cutter

Make 9 Fabric Donut Shapes with the TrueCut 360 Circle Cutter

by Paul Leger

Yesterday was a bit of a training session on using the TRUECUT 360 Circle Cutter. Today, we’re building on this skill, adding a couple more, and starting to cut circles.

A TrueCut 360 Circle Cutter

TrueCut 360 Circle Cutter

The first thing we’re going to do today is cut squares from our fabrics.

Cut from the background fabric nine 12½” x 12½” squares using the OLFA 12½” Square Frosted Acrylic Ruler along with the OLFA Splash Handle Rotary Cutter 45mm.

Then, from the fabric intended for the circles, cut nine 11” x 11” squares.

Cutting squares using the Olfa 12½” x 12½” square ruler and rotary cutter.

Cutting squares using the Olfa 12½” x 12½” square ruler and rotary cutter.

Now take a look at the bottom of the circle cutter and locate the red lines under the knob, as I showed you in yesterday’s post, How to Use the TrueCut 360 Circle Cutter for Quilting.

Locating the red lines under the TrueCut 360 Circle Cutter.

Locating the red lines under the TrueCut 360 Circle Cutter.

On each circle fabric square, draw an X. Each line of the X should be about four to six inches long. This should be done on the wrong side of the fabric. For this demonstration, I’ve drawn the X on the right side so it’s more visible in the photo.

An X is drawn on each of the fabric squares that will be used to make the circles.

Draw an X at the center of the circle fabric.

If you’re wondering what marking tool I like best, it’s the BOHIN Mechanical Chalk Pencil 0.9mm. It marks beautifully on fabric and washes or brushes away easily. It comes in five lead colors: white, green, black, yellow, and pink.

A BOHIN Mechanical pencil with additional leads in green, black, yellow and pink colors.

BOHIN Mechanical pencil and leads.

The diameter of each circle is 10”. Watch this video to see how to set the circle diameter and expose the blade on the TRUECUT 360 Circle Cutter.

Now set the circle cutter to make 10” circles.

If anyone is worried about the fabric shifting while using the circle cutter, here’s something that can help: ODIF 404 Spray and Fix Permanent Repositionable Adhesive. Apply a light coat to the back of the fabric, and it will stick to the cutting mat much like a sticky note.

If you choose to use Odif 404, I strongly recommend cutting on the back of an old cutting mat.

Odif 404 spray and fix permanent repositionable adhesive.

The very useful Odif 404 spray and fix permanent repositionable adhesive

After all nine circles are cut, reset the circle cutter to 8 inches. Using the same steps as before, cut a circle from the center of each one to create a donut shape, as shown in the next photo.

A circle is cut out of a larger circle to make a donut shape using the TrueCut circle cutter.

Making fabric donut shapes

Our nine donuts are all cut using the TRUECUT 360 Circle Cutter, and yes, I still love this tool! Join me tomorrow when we finish the quilt top and bring it all together.

This is part 3 of 5 in this series

Go back to part 2: How to Use the TrueCut 360 Circle Cutter for Quilting

YOU MAY ALSO LIKE...

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.