FREE Quilting Patterns, Tutorials, Magazine

Making the most of your fabric scraps for cool quilted projects!

Making the most of your fabric scraps for cool quilted projects!

by Jean Boyd

Yesterday, I showed you how to get started making a sewing/needle case while using up some scraps that had already been backed with HeatnBond fusible web.

Front of needle case stitched with Sulky variegated threads; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread, Mary Ellen’s Best Press

Front of needle case stitched with Sulky variegated threads

Now, let’s put everything together.

Using a fabric marking tool, draw lines in one corner ¾” from the outside edges of the 8½” x 12½” lining rectangle.

Place the raw edge of the pocket piece 1½” up from the drawn line at the bottom and ½” from the drawn line on the side, as shown in the picture below:

Stitch across raw edges of pocket; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Stitch across raw edges of pocket

Stitch across the raw edge of the pocket with a ½” seam to join the pocket to the inside rectangle.

You can make another pocket in the same way for the other side of the needle case if you wish.

Flip the pocket up and top-stitch along both long edges.

HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Top-stitch pocket in place

Center the 5″ x 8″ felt on the inside of the needle case.

Stitch down the center through all layers to join everything together.

Stitch wool in place for needle holder; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Stitch wool in place for needle holder

Center the front of the needle case and the inside piece with pocket and felt, wrong sides together. Press. You can pin or baste the layers together if you wish. You will have ¾” of inside fabric all around the outside edges.

Making a double fold; bring the excess fabric to the front to make a binding.

Stitch the binding in place by hand or machine.

Another finished needle case; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Another finished needle case!

And there you have it! Another quick and easy project that uses up some of those scraps in your stash. These little sewing/needle cases are great for storing scissors, marking pens and other small accessories as well as your favorite pins and needles. They’re also great for those last-minute gifts we always seem to need!

Another finished needle case; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Inside of needle case with pockets for accessories

I also had this collection of fusible crumbs from a previous project.

Leftover fusible pieces from another project; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Leftover fusible pieces from another project

I used them to make this little pillow:

Pillow with fusible scraps in the center; HeatnBond Featherlite, SCHMETZ nonstick needles, Olfa frosted ruler, Olfa scallop blade for rotary cutter, HeatnBond fusible fleece, HeatnBond fusible interfacing, Sulky variegated thread

Pillow with fusible scraps in the center

As quilters, we never want to throw any little piece of fabric away. I hope the projects this week have inspired you to create something new with your scraps and crumbs!

I’ll be back in 2021 with more designs and products for you to enjoy. Until then – happy stitching!

This is part 5 of 5 in this series

Go back to part 4: 5 top notions stitch up a crumb quilted needle case

YOU MAY ALSO LIKE...

2 comments

Elizabeth Phillips December 11, 2020 - 9:58 am

Hi Jean, Just found your site today! Congratulations!

Reply
Jean Boyd December 11, 2020 - 10:25 am

Thanks! I hope you’ll continue to follow us.

Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.