What’s really neat about batik fabric is that it doesn’t fray as easy as other types of cotton quilting fabric. Because of this fact, I planned this quilt with raw edge applique and a quick and easy quilting method in mind. Also, there’s typically no wrong or right side with batiks and this makes it easy to piece because you don’t have to worry about right sides together, an added bonus.
Remember to keep this raw edge and no right or wrong side in mind as I explain step by step what to cut and how to prepare the fabric.
1. Iron and square up all 10 pieces of fabric (including the backing/binding fabric).
2. Cut two 6½” WOF strips (width of fabric) from all 10 fabrics. Set backing and binding fabric aside for now.
3. Identify darks and lights (or medium and dark) and lay them down alternating light and dark as shown.
7. Using template B and the remaining fabric strips, cut out 7 arcs from each of the fabrics.
8. There should now be 70 squares and 70 arcs from each fabric.
9. Cut four 1″ x 17″ strips of HeatnBond Lite Iron-on Adhesive, then subcut into many 1″ x ½” pieces. HeatnBond Lite Iron-on Adhesive is a very light adhesive meant for fabric and will iron out to a soft finish on your quilt.
10. Iron the HeatnBond Lite Iron-On Adhesive pieces glue side down to the fabric, paper side facing towards you, close to the curve on each arc piece as shown. Don’t forget there’s no right or wrong side for the fabric, this makes it easy. I used 3 pieces on each arc, more can be used as desired.
11. Once the HeatnBond Lite Iron-On Adhesive has cooled, remove the paper backing from all of the arcs.
Tomorrow, I’ll show the process for fusing the arcs for the drunkards path blocks and piecing this quilt. The Fireside Modern Drunkards Path quilt made with the Jungle Rose Cool colorway by Banyan Batiks is well on its way to being completed.
See you tomorrow, until then Happy Tuesday.